24 Calea Urseni, Giroc, jud. Timiș, ROMÂNIA
sales@mvtech.ro
service@mvtech.ro
+40 729161419
Sparrow MTS 30
19 inch In-Circuit Test System
The Sparrow offers maximum flexibility and test capability in a small footprint.
- Up to 1,152 pins
- 19 inch – easy integration into a standard rack
- Very small footprint
- Fast Access Interface (FAI) – quick exchange interface for easy maintenance
- Real parallel test: easy implemention of Lambda edition
DESCRIPTION
The Sparrow MTS 30 is a 19“ test system that can be integrated into any standard rack. The In-Circuit tester can also be used as benchtop test system. With this compact and flexible tester you can perform both analog and digital In-Circuit and functional tests.
In spite of its small footprint the Sparrow features 9 slots for module cards with up to 1,152 test pins, which are available as analog or hybrid pins or even a combination of the two. In addition, the benchtop tester can accommodate up to four programmable power supplies. With the proven In-Circuit and functional test modules you can handle a majority of the possible test scenarios simply and economically.
FEATURES
- Maximum no. of networks 1,152
- Maximum board size (mm) Unlimited
- Interface Cable
- System size (LxWxD) 483 x 178 x 5,700
- Format 19″ housing, flexible
- Possible versions analog, hybrid & Lambda edition
- Maximum fixture pin number 1,152
FIXTURES
Ideal for
Inline handlers (board and fixture), since the device is small and compact.
Basically any interface is possible using a fixture adapter (e.g. Pylon or Virginia Panel)
In order to avoid long waiting times for the construction of the fixtures, Digitaltest offers an in-house fixture service.
FIXTURES
Ideal for
Fixtures can make double-sided contact
Fixtures can use rigid needles which are well suited for short distances and small pads
Works with the compressed air fixture press
In order to avoid long waiting times for the construction of the fixtures, Digitaltest offers an in-house fixture service.
Eagle MTS 180
In-Circuit Test System with Pneumatic Press
The Eagle enables inexpensive testing with low-cost fixture solutions.
- Up to 3,456 pins at 5,500 N
- Economical fixture Solutions
- Pneumatic press
- One-Touch Fixture: Interface for fast exchange of fixtures
DESCRIPTION
The Eagle MTS 180 is our most economical solution for high-volume production. The in-circuit tester is equipped with a press, so that you can dispense with expensive vacuum fixtures. The pneumatic press allows you to develop even highly complex fixtures at minimal cost.
Our Eagle at 5500 N can be equipped with up to 3456 analog and hybrid in-circuit test pins, making it the ideal test system for EMS service providers and high-volume production. In addition, the test system can be equipped with functional modules for greater fault coverage or configured as a function tester.
FEATURES
- Maximum no. of networks 3456
- Maximum board size (mm) 430 x 310
- Interface Pneumatic press
- System size (LxWxD) 1000 x 1700 x 860
- Format Pneumatic press, economical fixture solutions
- Possible versions analog, hybrid & Lambda edition
- Maximum fixture pin number 3456 (at 5500 N)
Sigma MTS 300
In-Circuit Test System with Vacuum Interface
The Sigma is multifunctional. It offers a lot of space for modules and functions, with a small footprint.
- Up to 3,456 pins
- Small footprint (<1m²)
- Vacuum or cable interface available
- Short measuring paths
- Real parallell test with Lambda edition
DESCRIPTION
Our Sigma MTS 300 has been designed for high throughput capability and with up to 1000 measurements per second it is one of the fastest in-circuit testers on the market. The test system can check your circuit boards with up to 3456 analog, 1664 hybrid or a combination of both test points. The Sigma puts flexibility, high fault coverage and simple programming at the fore.
You can use the modular test system for analog and digital in-circuit testing, vectorless testing, functional test, boundary scan and memory programming. Thanks to the non-multiplexed pin architecture it is also possible to use fixtures and test programs from other test systems.
FEATURES
- Maximum no. of networks 3456
- Maximum board size (mm) Unlimited
- Interface Vacuum or cable
- System size (LxWxD) 930 x 830 x 900
- Format Vacuum interface, short measuring distances
- Possible versions analog, hybrid & Lambda edition
- Maximum fixture pin number 3456
FIXTURES
Ideal for
Standard interface uses vacuum
Cable interface is also possible
Basically any interface is possible using a fixture converter (e.g. Pylon or Virginia Panel)
In order to avoid long waiting times for the construction of the fixtures, Digitaltest offers an in-house fixture service.
FIXTURES
Ideal for
Includes a pneumatic fixture placement aid
Basically any interface is possible using a fixture converter (e.g. Pylon or Virginia Panel)
In order to avoid long waiting times for the construction of the fixtures, Digitaltest offers an in-house fixture service.
Omega MTS 888
High Performance In-Circuit Tester
The Omega is our high performance tester, which offers the highest number of test pins.
- Up to 7,040 pins
- Swiveling interface for ergonomic Operation
- Pneumatic fixture lowering
- Short measuring paths
DESCRIPTION
Our highly ergonomic Omega MTS 888 offers not only a healthy workstation but also an extremely high-performance test system with 7040 test pins. Here we have developed a height-adjustable and tiltable high-performance tester that allows you to construct the fixture even while the test program is being developed.
Since each channel can be assigned to its own logic family, fixture construction is made much simpler. The in-circuit tester can also be configured as a functional tester. Here simply use our various modules, such as the frequency-time measuring unit, analog in-/output, or voltage sources.
FEATURES
Maximum no. of networks 7040
Maximum board size (mm) Unlimited
Interface Vacuum or cable
System size (LxWxD) 1500 x 860 up to 1060 (adjustable) x 750
Format High pin count, high-performance tester, ergonomic
Possible versions analog, hybrid & Lambda edition
Maximum fixture pin number 7040
Condor MTS 505
Flying Probe Test System
The Condor can combine different test methods and can therefore be used universally for all test strategies.
- 4-head flying probe system
- Universally applicable for all test methods
- Frontloader (manual loading), also available in-line
- Printed circuit boards without test points
- Optional fixture with up to 1,012 fix pins
DESCRIPTION
Our Condor MTS 505 flying probe tester requires no fixture and is therefore ideal not only for traditional production, but also for prototyping and low-volume production. Thanks to the four movable test heads it offers high adaptation depth and test coverage. The optional use of fixed test pins on the underside of the test object means you can also shorten the test time while increasing the test coverage. The Flying Probe test system is equipped with a digital color camera (CMOS) with GigE Vision interface to accurately determine the position of the probe and device under test (DUT). It is attached to one of the four test heads and contains optics, as well as lighting.
Frontloader
The board to be tested is manually placed in the tester using a front pull-out with two-handed locking. The bed rails feature adjustable tabs for automatically fixing the board. Magnetic fixing pins, support pins etc. can also be positioned on the base plate of the pull-out.
FEATURES
- Maximum no. of networks unlimited
- Maximum board size (mm) 432 x 508
- Interface Test heads via VG terminal strips, 64-pin
- System size (LxWxD) 1550 x 2000 x 1200
- Format Fixtureless testing, manual loading
- Possible versions none
- Maximum fixture pin number 1012
In-Line
Our in-line tester can be fully integrated into your production line. The circuit board moves automatically over the conveyor inside the tester via an in- and outfeed. The module is clamped up towards the top for testing, so that the PCB thickness makes no difference for contacting. SMEMA-compatible connections are available for pre-heat and post-cool modules in your production line.
FEATURES
- Maximum no. of networks unlimited
- Maximum board size (mm)505 x 500
- Interface Test heads and cable pin
- System size (LxWxD) 1550 x 2000 x 1200
- Format Fixtureless testing, integrated into production line
- Possible versions none
- Maximum fixture pin number 1012
FIXTURES
Variant frontloader:
The interface consists of plug connectors (64-pin) – fixtures can be connected to them via cables.
Variant In-line:
The interface consists of plug connectors (64-pin) – fixtures can be connected directly to them.
Multi-Level Fixture (incl. Condor Fixture Lifting Mechanism)
Two-stage device for the Condor Flying Prober with a lifting mechanism allowing the user to contact the same device in different ways.
Flying Probe PCB Carriers
Customized PCB Carriers
Universal PCB Carrier
In order to avoid long waiting times for the construction of the fixtures, Digitaltest offers an in-house fixture service.